EZVIZ HB8 Battery-Powered Pan & Tilt Wi-Fi Camera

Camera
Image Sensor	1/3” 4-Megapixel Progressive Scan CMOS Sensor
Minimum Illumination	0.01 Lux @ (F1.6, AGC ON), 0 Lux with IR (Data is obtained from EZVIZ laboratories)
Shutter Speed	Self-adaptive shutter
Lens	4mm @ F1.6 Viewing angle: 100°(Diagonal), 83°(Horizontal), 44°(Vertical)
PT Angle	Pan: 340°, Tilt: 65°
Day & Night	IR-Cut filter with auto-switching
DNR	3D DNR
Night Vision	Up to 49 ft / 15 m
Video & Audio
Max. Resolution	2560 × 1440
Frame Rate	15fps. Self-Adaptive during Network Transmission
Video Compression	H.265 / H.264
Video Bit Rate	Ultra-HD; HD; Standard. Adaptive Bit Rate.
Audio Bit Rate	Self-Adaptive
Max. Bitrate	2 Mbps
Network
Wi-Fi Standard	IEEE802.11b, 802.11g, 802.11n
Frequency Range	2.4 GHz ~ 2.4835 GHz
Channel Bandwidth	Supports 20 MHz
Security	64 /128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Transmission Rate	11b: 11Mbps, 11g: 54Mbps, 11n: 150Mbps
Wi-Fi Pairing	AP pairing
Protocol	EZVIZ cloud proprietary protocol
Interface Protocol	EZVIZ cloud proprietary protocol
Minimum Network Requirement	4Mbps
Function
Detection	Smart Human Motion Detection
Two-way Talk	Supports
General Function	Anti-Flicker, Heart Beat, Password Protection, Watermark
Storage
Local Storage	Build-In 32GB eMMC Storage
Cloud Storage	Supports EZVIZ CloudPlay storage (Subscription required)
General
Operating Conditions	-20 °C to 50 °C (-4 °F to 122 °F ), humidity 95% or less (Non-condensing)
IP Grade	Weatherproof Design
Power Consumption	Max. 10W
Product Dimensions	183 × 116 × 166 mm (7.20 × 4.57 × 6.52 inch)
Packaging Dimensions	216 × 145 × 203 mm (8.50 × 5.71 × 7.99 inch)
Weight	Net: 803 g (28.32 oz) With package: 1060 g (37.39 oz)
Battery
Battery Capacity	10400 mAh
Power Supply	DC 5V / 2A
In the box
In the box	- HB8 2K⁺ Camera
- Drilling Template
- USB Cable
- Screw Kit
- Quick Installation Guide
- Regulatory Information
- Quick Start Guide
Certifications
Certifications	CE / FCC / WEEE / RoHS / REACH / UL

(a) ACL: Certain legislation including the Australian Consumer Law (ACL) in the Consumer and Competition Act 2010 (Cth), and similar consumer protection laws and regulations may confer you with rights, warranties, guarantees and remedies relating to the provision of goods or services to you by us via the Site which cannot be excluded, restricted or modified. Our liability is governed solely by the ACL and these Terms.
(b) Goods: If you are a consumer as defined in the ACL, the following notice applies to you: “Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure
(c) Our warranties: To the extent permitted by law, we exclude all express and implied warranties, and all material and work is provided to you without warranties of any kind, either express or implied. We expressly disclaim all warranties including but not limited to implied warranties of merchantability and fitness for a particular purpose.
(d) Manufacturer warranties: Certain products, including particular models of IP security cameras and DVR/NVR equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is in addition to but may overlap with any rights and remedies you may have under applicable law, including any Consumer Guarantees. If you are not considered a “consumer” within the meaning of the ACL, the manufacturer’s warranty may be your sole remedy. You should check the manufacturer’s warranty, as many manufacturers’ warranties do not apply in a business or commercial setting. Please contact the manufacturer if you would like to make a claim under the manufacturer’s warranty.
(e) Repair, replacement or a refund: If you wish to seek repair, replacement or a refund for a product, please contact us and we will explain the requirements to you. This may include you providing evidence of the faulty product to us.
(f) Refund: You are not entitled to a refund for change of mind. If you are entitled to a refund, we will only give you the refund once evidence of faulty product is received by us, or we have received the product at our warehouse and inspected it and assessed whether it is eligible for a refund under these Terms. Any refund we make will be by the same payment method used to purchase the product.
(g) Installed: Subject to this clause, we will not accept for return any product that has been used, connected, installed, attempted to be connected or installed, or if your product is custom-made or is a special buy product.
(h) Packaging: You must adequately package any product you are returning for our collection to ensure that it is not damaged during return delivery to our warehouse. You are also responsible for arranging the return delivery and the costs involved.
(i) Duty of care: You have a duty of care for the product while it is in your possession. If you damage products, then subsequently return the products, you may be liable to pay to repair the product to its original condition. In these circumstances, where a repair is not economically viable, no refund will be made.

Orders are processed Monday through Friday and are shipped within 24 hours of placement, excluding weekends and public holidays. Tracking information is sent via email at 11pm on the day that orders are shipped out.

f you have not received your items within 4 business days of making your order please email us with your full name and order number and we will look into your delivery immediately.  In most cases this means that an attempted delivery has occurred and that your parcel is waiting for you at your nearest post office for collection. Please check your spam box for any notification emails from us.

If you book our installation, the products will deliver at the same time.